Contact

Phone
856-488-2299
Hours of Operation
Mon - Fri 7am - 7pm
Area of Service
Southern New Jersey &
Greater Philadelphia
Employee Login.png
  • Black Facebook Icon
  • Black Twitter Icon
  • Black Instagram Icon
  • Black LinkedIn Icon

©2023 by Dr. Mark. Proudly created with Wix.com

Ductless, mini split-system air-conditioners (mini splits) have

numerous potential applications in residential, commercial, and

institutional buildings. The most common applications are in

multifamily housing or as retrofit add-ons to houses with "non-ducted"

heating systems, such as hydronic (hot water heat), radiant panels,

and space heaters (wood, kerosene, propane). They can also be a

good choice for room additions and small apartments, where

extending or installing distribution ductwork (for a central

air-conditioner or heating systems) is not feasible.

 

Like central systems, mini splits have two main components: an

outdoor compressor/condenser, and an indoor air-handling unit. A

conduit, which houses the power cable, refrigerant tubing, suction

tubing, and a condensate drain, links the outdoor and indoor units.

The main advantages of mini splits are their small size and flexibility for zoning or heating and cooling individual rooms. Many models can have as many as four indoor air handling units (for four zones or rooms) connected to one outdoor unit. The number depends on how much heating or cooling is required for the building or each zone (which in turn is affected by how well the building is insulated). Each of the zones will have its own thermostat, so you only need to condition that space when it is occupied, saving energy and money.

Ductless mini split systems are also often easier to install than other types of space conditioning systems.      For example, the hook-up between the outdoor and indoor units generally requires only a three-inch (~8        centimeter [cm]) hole through a wall for the conduit. Also, most manufacturers of this type of system can        provide a variety of lengths of connecting conduits. So, if necessary, you can locate the outdoor unit as        far away as 50 feet (~15 meters [m]) from the indoor evaporator. This makes it possible to cool rooms on      the front side of a building house with the compressor in a more advantageous or inconspicuous place          on the outside of the building.

Since mini splits have no ducts, they avoid the energy losses associated with ductwork of central forced air systems. Duct losses can account for more than 30% of energy consumption for space conditioning, especially if the ducts are in an unconditioned space such as an attic.

Compared with other add-on systems, mini splits offer more flexibility in interior design options. The indoor air handlers can be suspended from a ceiling, mounted flush into a drop ceiling, or hung on a wall. Floor-standing models are also available. Most indoor units have profiles of about seven inches (~18 cm) deep and usually come with sleek, high-tech-looking jackets. Many also offer a remote control to make it easier to turn the system on and off when it's positioned high on a wall or suspended from a ceiling. Split-systems can also help to keep your home safer, because there is only a small hole in the wall. Through-the-wall and window mounted room air-conditioners can provide an easy entrance for intruders